Back

Home

PULTI POWER STRIPS - PDU stock items List prices excl. VAT

I. 19"mountable PULTI power distribution units PDU (use fixation brackets PE or PB for 19"mounting)

UP0440RR or P600198-28 PULTI power distribution unit with 9 French UTE sockets  without switch or protection. The unit is housed  in an anodised aluminium case of 440 mm large and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt – max. load: 16 A. with CE label  at  62,39 €.

UP0440RR-SC or P600197-28 PULTI power distribution unit with 8 French UTE sockets,  with internal 3 x 2,5 mm² connection plug, without switch or protection. The unit is housed  in an anodised aluminium case of 440 mm large and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt – max. load: 16 A. with CE label  at  66,01 €.

UP0440VI or P600214-28 PULTI power distribution unit with 8 French UTE sockets  with a light signal switch. The unit is housed in an anodised aluminium case of 440 mm large and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt - maximum load: 16 A. with CE label at 67,70 €.

UP0440SW or P600241-28 PULTI 1 master- 5 slaves power distribution unit with 6 French UTE sockets with automatic switch. An electronic sensor monitors the drain of  the master unit (connected to the black socket) When it switches on, the current rises, activates the circuit and the 5 remaining white sockets, called the slave outputs, are automatically  switched on. When you use it on a PC; If you switch the mainframe on, all auxiliary units (printer, plotter, ...) are switched on automatically with a minimum master current of 50 mA. The unit is housed in an anodised aluminium case of 440 mm large and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt -maximum load: 16 A.  with CE label at 147,12 €.

UP0440AR or P600563-28 PULTI power distribution unit with 6 French UTE sockets with an RFI suppression filter of 16A for a protection against  interferences from the mains and from the equipment.  The unit is housed in an anodised aluminium case of 440 mm large and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt -maximum load: 16 A.  with CE label at  153,60 €.

UP0440SG or P600212-28 PULTI power distribution unit with 6 French UTE sockets with a lightning conductor protection, RFI protection against  high frequency disturbances and thermal fuses (<5 ns). This is a good protection against transient atmospheric and industrial overloads. The unit is housed in an anodised aluminium case of 440 mm large and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt -maximum load: 16 A.  with CE label at 232,20 €.

UP0440DT-10A or P604439-28 PULTI power distribution unit with 6 French UTE sockets with an overcurrent circuit-breaker of 10A for protection against overcurrents and short circuit. C-trippingcurve, breaking capacity 6 kA in accordance with IEC947-2 and delivered with a clear plastic protection cap to avoid accidental circuit breaks.  The unit is housed in an anodised aluminium case of 440 mm large and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt -maximum load: 16 A.  with CE label at 130,70 €.

UP0440DP-16A or P605239-28 PULTI power distribution unit with 6 French UTE sockets with an overcurrent circuit-breaker of 16A for protection against overcurrents and short circuit. C-trippingcurve, breaking capacity 6 kA in accordance with IEC947-2 and delivered with a clear plastic protection cap to avoid accidental circuit breaks.  The unit is housed in an anodised aluminium case of 440 mm large and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt -maximum load: 16 A.  with CE label at 130,70 €.

UP0440CB or P600185-28 PULTI power distribution unit with 6 French UTE sockets with a 16 A residual current operated circuit-breaker, 30 mA, for protection against overloads, short circuit and current imbalances. Current breaking capacity 10 kA in accordance with IEC1009.  The unit is housed in an anodised aluminium case of 440 mm large and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt -maximum load: 16 A.  with CE label at 150,71€.

II. 19" PULTI Power Distribution Units (PDU) with German & Dutch SCHUKO sockets ( use PE or PB for 19" mounting)

GP0440RR or P600068-28 PULTI power distribution unit with 9 German  SCHUKO sockets  without switch or protection. The unit is housed  in an anodised   aluminium case of 440 mm large and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt - maximum load: 16 A. with CE label  at  81,07 €. 

III. Longer PULTI - PDU - Power Distribution Units (Use PB or PC brackets)

UP1232RR or P600242-28 PULTI power distribution unit with 13 French UTE sockets  without switch or protection. The unit is housed  in an anodised  aluminium case of  1232 mm. long and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt - maximum load: 16 A. with CE label  at  135,22 €. 

UP1760RR or P600244-28 PULTI power distribution unit with 19 French UTE sockets  without switch or protection. The unit is housed  in an anodised  aluminium case of  1760 mm. long and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt - maximum load: 16 A. with CE label  at  177,74 €. 

UP1232RR-SC or P601434-28 PULTI power distribution unit with 13 French UTE sockets, with internal 3 x 2,5 mm² connection plug,   without switch or protection. The unit is housed  in an anodised  aluminium case of  1232 mm. long and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt - maximum load: 16 A. with CE label  at  128,25 €. 

UP1760RR-SC or P600284-28 PULTI power distribution unit with 19 French UTE sockets, with internal 3 x 2,5 mm² connection plug,   without switch or protection. The unit is housed  in an anodised  aluminium case of  1760 mm. long and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt - maximum load: 16 A. with CE label  at  171,55 €. 

P605322-28 PULTI power distribution unit with 10 French UTE sockets, with internal 3 x 2,5 mm² connection plug,   without switch or protection. The unit is housed  in an anodised  aluminium case of  968 mm. long and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt - maximum load: 16 A. with CE label  at  130,00 €. 

IV. PULTI - PDU - Power Distribution Units in red colour and a PULTI PDU for UPS C19 - C20 connection

UP0440RR-RED or P601387-28 PULTI power distribution unit with 9 French UTE sockets  in red colour without switch or protection. The unit is housed  in an anodised  aluminium case of  440 mm. long and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt - maximum load: 16 A. with CE label  at  67,64 €. 

UP0440RR-RED-SC or P604313-28 PULTI power distribution unit with 8 French UTE sockets in red colour,  with internal 3 x 2,5 mm² connection plug, without switch or protection. The unit is housed  in an anodised aluminium case of 440 mm large and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt – max. load: 16 A. with CE label  at  76,56 €.

P607356-28 PULTI power distribution unit with 9 French UTE sockets  in red colour without switch or protection, but with a cable with IEC320 C14 10A plug. The unit is housed  in an anodised  aluminium case of  440 mm. long and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt - maximum load: 10 A. with CE label  at  69,88 €. 

UP1760RR-RED or P604437-28 PULTI power distribution unit with 19 French UTE sockets in red colour without switch or protection. The unit is housed  in an anodised  aluminium case of  1760 mm. long and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt - maximum load: 16 A. with CE label  at  177,55 €. 

All other configurations, like we have in stock in white colour, are also available in red colour but must be specially made with a minimum of 5 pieces, what takes only 2-3 weeks. This enables us to make very special customized PDU's with a delivery time of only 2-3 weeks. Please request for a quote. Also other colours like green, blue are also available upon request.
P606007 PULTI power distribution unit with 9 French UTE sockets 250V/16A without switch or protection, but with a 2 meter 3 x 2.5 mm² cable with IEC320 C20 16A plug. This can be used to plug into the female C19 sockets of an UPS system. The unit is housed  in an anodised  aluminium case of  440 mm. long and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt - maximum load: 16 A. with CE label  at  110,28 €. 

V. 19"PULTI - PDU - 19" Power Distribution Unit in Orange colour:

P606963-28PULTI power distribution unit with 9 French UTE sockets  in orange colour without switch or protection, but with a cable with IEC320 C14 10A plug. The unit is housed  in an anodised  aluminium case of  440 mm. long and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt - maximum load: 16 A. with CE label  at  72,38 €. 

P610625-28 PULTI power distribution unit with 8 French UTE sockets in red colour,  with internal 3 x 2,5 mm² connection plug, without switch or protection. The unit is housed  in an anodised aluminium case of 440 mm large and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt – max. load: 16 A. with CE label  at  73,65 €.

 

All other configurations, like we have in stock in white colour, are also available in orange colour but must be specially made with a minimum of 5 pieces, what takes only 2-3 weeks. This enables us to make very special customized PDU's with a delivery time of only 2-3 weeks. Please request for a quote. Also other colours like green, blue and yellow are also available upon request.

VI. PULTI 19" Power Units in black colour

UP0440RR-BK or P604875-28 PULTI power distribution unit with 9 French UTE sockets  in black colour without switch or protection. The unit is housed  in an anodised  aluminium case of  440 mm. long and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt - maximum load: 16 A. with CE label  at  67,64 €. 
PE19B pair of 19" mounting brackets in black colour at 4,95 €/set.

UP0440RR-BK-SC or P604654-28 PULTI power distribution unit with 8 French UTE black sockets  with internal 3 x 2,5 mm² connection plug, without switch or protection. The unit is housed  in an anodised aluminium case of 440 mm large and 1 rack Unit or 44,45 mm. high. Nominal tension: 250 Volt – max. load: 16 A. with CE label  at  74,25 €.
PE19B pair of 19" mounting brackets in black colour at 4,95 €/set.

All other configurations, like we have in stock in white colour, are also available in black colour but must be specially made with a minimum of 5 pieces, what takes only 2-3 weeks.
This enables us to make very special customized PDU's with a delivery time of only 2-3 weeks. Please request for a quote.

VII . 19” PULTI with uninterruptable sockets with built-in locking mechanism:


The uninterruptable sockets, with built-in locking mechanism are used in cabinets with p. e. UPS systems, where only the computer equipment is connected to this special uninterruptable PULTI.

A special adhesive key delivered with this special uninterruptable PULTI, must be sticked on the plug, to open it, and to connect the plug to the mains.

DP0440RR or P600350-28 PULTI power distribution unit with 9 French UTE uninterruptable sockets, with built-in locking mechanism. A special adhesive key delivered with the DP0440RR must be sticked on the plug to open it. The unit is housed  in an anodised aluminium case of 440 mm large and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt – max. load: 16 A. with CE label  at  105,82 €.

VIII. 19” PULTI with universal IEC 320 - C13 sockets:

IEC600768 or P600768-28 PULTI power distribution unit with 9 universal IEC 320-C13 sockets 10A without switch or protection. The unit is housed  in an anodised aluminium case of 440 mm large and 1 rack Unit or 44,45 mm. high. 
Nominal tension: 250 Volt - maximum load: 16 A. with CE label  at  120,00 €. 

IEC601592 or P601592-28 PULTI power distribution unit with 8 universal IEC 320-C13 sockets 10A, with internal 3 x 2,5 mm² connection plug, without switch or protection. The unit is housed  in an anodised aluminium case of 440 mm large and 1 rack Unit or 44,45 mm. high, and a set of 19" mounting brackets in black colour is included. Nominal tension: 250 Volt – max. load: 16 A. with CE label  at 117,50 €.

IEC601766 or P601766-28 PULTI power distribution unit with 9 universal IEC 320-C13 sockets 10A without switch or protection, but with a cable with IEC320 C14 10A plug. The unit is housed  in an anodised aluminium case of 440 mm large and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt - maximum load: 10 A. with CE label  at 129,75 €. 

IX. 19” PULTI with universal IEC 320 - C19 - 16 A. sockets:

IEC606248 or P606248-28 PULTI power distribution unit with 9 universal IEC 320 C19 sockets 16A without switch or protection. The unit is housed  in an anodised aluminium case of 440 mm large and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt - maximum load: 16 A. with CE label  at  192,50 €. 

X. Fixation brackets for PULTI power strips (per set of 2 pieces) - Magnetic strip of 320 mm long (per piece)

PB or 127000 at  4,30 €.       

PE  or 127005 at  4,95 €

PC or 127003 at  13,75 €

P-MAGN or 140024 at 21,76 €

XI. NEW PULTI with polycarbonate fixation brackets

The NEW PULTI generation can be executed in the same configurations as the standard PULTI range, but it is delivered with polycarbonate brackets that can only be fixed at the end positions in all directions. Random fixation like on the standard PULTI range with PC brackets that are sliding at the rear side are not possible in this range. The NEW PULTI have the following features:

New design in a natural anodized aluminium body of 1U high or 19" standard.
44 mm modules in compliance with the 19" standard , CEI 297-3 (NF C20-152).
Customization is possible starting from only 5 - 10 pieces.
Fixation system with fixation brackets directly integrated into the end-caps.
Polucarbonate fixation brackets which are adjustable in all directions.
End-caps with screwless cable-clamps (diameter 1.5 mm).
Slotted end-caps enabling straight cable installation or cable bending to the backside.

UP0440RR1or P620070-28 PULTI power distribution unit with 9 French UTE sockets  without switch or protection. The unit is housed  in an anodised aluminium case of 440 mm large and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt – max. load: 16 A. with CE label, with 2 meter long cable, at  70,00€.

UP0440RR2 or P620128-28 PULTI power distribution unit with 9 French UTE sockets  without switch or protection. The unit is housed  in an anodised aluminium case of 440 mm large and 1 rack Unit or 44,45 mm. high.  Nominal tension: 250 Volt – max. load: 16 A. with CE label, with 3 meter long cable, at  73,70 €.


XII. NON-STOCK PULTI POSSIBILITIES (delay time 2-3 weeks)

Pulti with German sockets, switch & Voltmeter

Pulti with energy meter

Pulti with switch & hygrometer

Pulti with switch & thermometer

Pulti with temperature controller (switch-on all blue outlets when the temperature is over the setting point or all red outlets when this in under)

IPSO Switcher : Piloting of equipments from a distance by Internet or Intranet
You can download the complete PDU DATA CENTER catalogue by pushing here or on the photographs on the left.
IP management (Intranet and Internet) of 4 or 8 outlets through a Web server.
APPLICATIONS :
- Starting and switching off of each individual equipment,
- Remote power supply and electronic surveillance,
- Equipment access authorisation,
- Energy-saving management.
DESCRIPTION :
- PDU made of natural anodized aluminium,
- 4 or 8 outputs on the basic model (5 A max. per outputs),
- Indicator about the status of the outlets,
- 1 RJ 45 connector (10 base T) on front face,
- 4 diagnostics Leds,
- Web server available in 4 languages : french, english, german and spanish.
- Password authorisation (changeable) enables access to the following actions :
---- Permanent switch-on : "on" button.
---- Permanent switch-off : "off" button.
---- Brief switch-off (adjustable from 3 to 255 s) : "reboot" button.
- The password can be changed as often as is necessary with a flexible protocol.
- Ready to use (no software to install),
- Image display on the navigator screen with : IP adress, 3 control buttons, socket-outlets status indicator, time status of the reboot function.
- At the disposal of the user :the product identification, its supply or ouputs configuration.
- Fixation brackets for 19" horizontal mount or for flat mount please ask us.

CONCEPT

From a local or remote command, sequential switch-on and switch-off of several socket-outlets and connectors.
- The start order is given :
a) on the "master", by a single-pole switch,
b) on the 1st "slave", by a signal coming from the "master" via a one pair cable.
c) on the following "slaves" by a signal coming from the previous "slave".
- The links between modules are made at very low voltage through a male-male cable (RJ 12).

APPLICATIONS

- A sequenced start-on and switch-off of the equipments.
- A step by step start of a large number of equipments from a single command.
- A smooth start-up for sensitive equipment for which a timing protocol is required.
- Reduction of current surges and voltage transients.
- Reduction of line voltage drops at start-up.
- Avoids nuisance tripping of circuit-breakers.
- Single centralised control.
- Local or external control available.
- Compatible with time shifts in certain processes.

DESCRIPTION

- PDU made of natural anodised aluminium.
- The function is available as three modules depending on the application :
1) "master" : starter supply,
2) "slave" : second and following in cascade,
3) "mixed" : equiped with a mechanical switch (key) in order to isolate one single PDU from the chain as to live the other outlet on.
- Each module can control a maximum of 4 or 8 tap-offs or outputs (5 A max. per outputs).
- Switch-on operations are spaced by around 200 ms and switch-off are spaced by around 400 ms in the same order.
- All these products are equiped with a HO5VVF 3 G 1,5 mm2 - 2 m cable, with a mixed french/german moulded plug 16 A 250 V.
- Fixation brackets for 19" horizontal mount or for flat mount.

 

Other possibilities of PULTI are: - All possible mainssockets of most countries like:

Socket name
for
Countries
Approved
CE

UTE


Belgium, Algeria, Cameroon, central African republic, Chad, Congo, France, Gabon, Tunisia, Senegal, Libanon, Ivory Coast

France: UTE -LCIE, Belgium: CEBEC RQ

SCHUKO


Netherlands, Austria, Ethiopia, Finland, Germany, Hungry, Iceland, Indonesia, Luxemburg, Norway, Portugal, Spain, Sweden, Turkey, Yugoslavia

Germany: VDE, GS-TÜV, Austria: OVE, Finland: SETI-FIMKO, Norway: NEMKO, Sweden SEMKO, The Netherlands: KEMA RQ,

Suisse


Switserland

Switserland: ASE

British


Great-Britain, Hongkong, India, Irak, Ireland, Kuwait, Pakistan, Singapore, South Africa

Great-Britain: BEAB, BSI

USA


USA, Cambodia, Canada, Japan, Korea, Philippines, Taiwan, Thailand

USA: UL

CEE 22


All countries.

Standard IEC320-C13 10A socket but the IEC320-C19 16A sockets are also possible.

Italian


Italy


Multi-standard


Germany, Italy, USA



This are all Pulti mainsstrips with single line aluminium case, but a double line with 2 rows of socket on the front is also possible and the front rear version is another possibility.
Special configurations in Pulti-Line, Pulti-Dual-V and PULTI Dual-H can be made, starting from a minimum of 5 pieces, on your simple request. Tel. 0032/(0)51/24.00.99 or email to sales@eldeco.be
 
Lots of other configurations, double mainsstrips, other sockets of all countries, mixed sockets (mains, RJ45, BNC, etc…) can be made in small quantities, on demand. Also sockets in red colour or sockets in black colour are possible. Also IEC320 - C19 16A sockets are possible. Some special sockets are listed below:

FM

RJ45

RCA

TV

USB

VGA

To see the internal construction of a high quality PULTI mainsstrip and some special made PULTI's push this hyperlink

QUALITY & RELIABILITY

ELECTRICAL QUALITY TO INTENSIFY RELIABILITY:

Internal connection of sockets by double-contact bars:

  • Cross-section area of 4 mm².

  • No resistive discontinuity between socket outlets.

  • High contact surface between the pin of the plug and the female contact assembly.

COMPLIANCE WITH STANDARDS, A SAFETY FACTOR:

  • IEC 884-1 standard compliance.

  • High mechanical strength.

  • Product compliance with the country standard where it is used.

  • Use of high-quality plastic materials:

    • fire-resistant

    • halogen free

    • insensitive to ultra violet rays

    • handles glow-wire test at 750 °C.

 

ERGONOMIC 19" STANDARD EQUIPMENT:

  • Power distribution unit designed for the 19" standard.

  • 44 mm modules, in compliance with the 19" 1U standard, IEC 297-3 (NFC 20152).

  • Extremely compact solution.

  • Sockets 45° orientated.

  • No power cords overlapping with 90° angle plus - all sockets can be used.

FLEXIBLE TO MATCH ALL REQUIREMENTS:

  • A modular system allowing optimum adaptation to operational configurations.

  • A combination of power and low voltage accessories with their corresponding associated protection(s).

  • A large collection of fixings and accessories.

AESTHETICISM & CUSTOMIZING FOR A BETTER HARMONY:

  • Body made of natural anodised aluminium.

  • Grey moulded parts and power cords (RAL-7035).

  • All other colours & anodised coatings available on special request. (only for quantities)

Download the complete catalogue in English 3Mb

Download the complete catalogue in French 3 Mb (Français)

Back

Home INQUIRY FOR DOCUMENTATION - QUOTE or ORDER